I.CAM32 5.0
From i.STAR Help
(CAM32 v4.05 Required)
Contents |
Build Updates
5.0 Build Updates : Build updates for i.STAR v5.0 and i.CAM32 v5.0.
New Features/Changes
UPS OnLine Tools
Retailers are now able to configure and use UPS OnLine Tools to have shipping cost estimates looked up in real-time from the i.CAM32 shopping cart to UPS.
Shipping costs will be calculated based on weight and the ship to zip code (at a minimum). The default weight by department is entered in the "admin" section of the site, but individual item's weights can be set, if different than the default department setting, in CAM32 as shown below.
Shoppers can also see UPS tracking information when viewing order history in My Account.
NOTE: You must have "fallback" rates set up in CAM32 for the methods you are using UPS integration with so in the event UPS doesn't return a rate, their rate system is down, etc., i.CAM32 has a fallback rate to use. i.CAM32 checks for the fallback rates during the checkout process and if they are not set, the shopping cart will get an error so it is important to make sure the fallback rates are set in CAM32.
Shipping Exceptions:
Code:
Code 0 – None – No exception. Use this option for items that do not have any special shipping. Standard shipping applies.
Code 1 – Substitute – Replacement shipping amount. Use this option for items that will have a special shipping amount that replaces the standard amount.
Code 2 – Premium – Additional amounts added to the standard amount. Use this option for items that will have the standard shipping amount plus an additional charge added to the standard shipping.
Amount: Use this field to indicate the substitute amount or the premium amount.
Shipping Options:
Ship Separately – Use this option to indicate that the item must not be included with the shipping of the rest of the order.
Additional Handling – Use this option to indicate that special care must be taken with this item.
Packaging Code – UPS Packaging Codes. Select the code that this item when shipped alone would be placed in.
Dimensions and Weight – Use this section to enter measurements and weight for the item.
Enter the default weight at the department level by logging into your site's "admin" area (ie. www.yourdomain.com/admin) and select the "Department" link on the left, and select the department you wish to update. If you need to set individual item weights different than the default department weight, you can set that in the item record in CAM32 as described above.
In order to use UPS OnLine Tools you must first agree to the UPS license and set up an OnLine Tools account. Before enabling UPS shipping, CAM32 Shipping Methods need to be mapped to UPS Shipping Methods, and all other settings configured in the UPS Online Section of the admin area.
Account Type: With a Daily Pickup Account, a UPS driver will make a regular stop at your location each day, Monday through Friday, to pick up all package types, including: Ground shipments, Air shipments, International shipments.
NOTE: A weekly service charge applies, and Daily Rates will be billed to your UPS Account (see the UPS Rates section under Terms and Conditions of Service in the online UPS Service Guide).
With an Occasional Account, you decide if and when you need to schedule a UPS driver to pickup your shipments. Once you have prepared your UPS shipments, you have the following options:
- Schedule an On Call Pickup to have your shipment picked up by a UPS driver for a nominal fee.
- Hand your shipments to any UPS driver in your area.
- Take your shipments to The UPS Store, a UPS Customer Center, or an authorized Shipping Outlet.
- Drop off your Air, Ground, or International shipments at one of over 60,000 UPS locations.
NOTE: No weekly service charge applies. UPS On Demand rates will be billed to your UPS Account (see the UPS Rates section under Terms and Conditions of Service in the online UPS Service Guide).
Set Declared Value: If this box is checked it adds charges for Protection Against Loss or Damage. Check UPS rates table on additional charges for updated fees and values.
POS State Code to UPS Country Code Mapping This is where you need to map the POS States Codes you have set up in CAM32 to the UPS Country Codes listed and then hit the Create Mapping button. Once you hit the Create Mapping button, it gets added to the Current State Mappings box below.
Map Shipping Methods: Each shipping method set-up in CAM32 that you wish to have rates looked up in real-time from the i.CAM32 shopping cart to UPS needs to be mapped to UPS methods by clicking the Edit button at the right of it. They can be set-up to have a different order subtotal threshold, or can have free shipping enabled.
NOTE: Not all shipping methods must use the online UPS rates, you may have some shipping methods that do while others continue to use the rate tables you have set up in CAM32.
After mapping CAM32 shipping methods to UPS shipping methods retailers can then enable UPS OnLine tools.
Product Level Taxation
Online orders will consider product level taxation (yes/no)
Customer Discounts
Customer discounts set in the customer record in CAM32 take effect on the web after the customer logs in. Customer discount types are percent and dollars off and price level.
New Templates
siteAuthorization.template
| Data Source: | <isdata source="istardatasources.siteauthorization"> |
| Include File: | <isinclude name="/stock/siteAuthorization.include"> |
| Action ID: | 73 |
| Description: | The user authentication page. For stores that don't want just anyone to be able to use their site. |
| Suggested Headers: | |
| Notes: |
Modified Stock Templates
order-header-footer.include
| File Name: | /stock/orders/order-header-footer.include |
| Description: | Displays the order header and footer. |
| Severity/Summary: | High This include will not function without changes. |
| Changes: | This include has been split into two includes, /stock/orders/order-header.include and /stock/orders/order-footer.include. |
pdContent.include
| File Name: | /stock/productdetail/pdContent.include |
| Description: | Displays the product detail information. |
| Severity/Summary: | Medium This include will be missing functionality if it is not updated. |
| Changes: | The "Add to Wish List" functionality has been added to this include. It consists of a button next to the "Add to Cart" button and a javascript function addToWishList(). |
cartcontents.include
| File Name: | /stock/shippingcart/cartcontents.include |
| Description: | Displays the customer's shopping cart. |
| Severity/Summary: | High This include will not function without changes. |
| Changes: | Shipping totals will not be display until either the customer has logged in, or the customer has chosen a state and zip code. Inputs have been added to allow customers to choose if their address is residential or commercial. A UPS disclaimer has been added to the bottom of the shopping cart if UPS is chosen as a shipping method. |
